12 - FINAL SHUTDOWN
12.1 - Shutting down
Separate the units from their energy sources, allow them to cool then drain them completely.
12.2 - Recommendations for disassembly
Use the original lifting equipment.
Sort the components according to their material for recycling or disposal, in accordance with regulations in force.
Check whether any part of the unit can be recycled for another purpose.
12.3 - Fluids to be recovered for treatment
- Refrigerant
- Heat-transfer uid: depending on the installation, water, brine solution, etc.
- Compressor oil
12.4 - Materials to be recovered for recycling
- Steel
- Copper
- Aluminium
- Plastics
- Polyurethane foam (insulation)
12.5 - Waste Electrical and Electronic Equipment (WEEE)
At the end of its life, this equipment must be disassembled and contaminated uids removed by professionals and processed
via approved channels for waste electrical and electronic equipment (WEEE).
31
To Next Page
Loading...
