Carrier AquaSnap Touch Pilot Junior Series - 4 Dimensions, Clearances; 30 RQS 039 and 045-078, Units with and Without Hydraulic Module

12
4 - DIMENSIONS, CLEARANCES
4.1 - 30RQS 039 and 045-078, units with and without hydraulic module
For units with fans with variable available pressure (30RQSY) please refer to the pages that follow.
Legend
All dimensions are given in mm.
NOTES:
A Non-certied drawings.
Refer to the certied dimensional drawings supplied
with the unit or available on request, when designing an
installation.
For the location of xing points, weight distribution and
coordinates of the centre of gravity refer to the certied
dimensional drawings.
B In multiple-unit installations (maximum four units), the
side clearance between the units should be increased
from 1000 to 2000 mm.
C The height of the solid surface must not exceed 2 m.
Control box
Water inlet.
Water outlet
B
Required clearances for air ow
C
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry