18
4.7 - 30RQSY 080-120 units with and without hydraulic module
*
*
Legend
All dimensions are given in mm.
Control box
Water inlet.
Water outlet
B
Required clearances for air ow
C
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
NOTES:
A Non-certied drawings.
Refer to the certied dimensional drawings supplied
with the unit or available on request, when designing
an installation. For the location of xing points,
weight distribution and coordinates of the centre of
gravity refer to the certied dimensional drawings.
B The unit must be installed level (less than 2 mm per
metre deviation in both axes).
* Overall dimensions
4 - DIMENSIONS, CLEARANCES