Carrier AquaSnap Touch Pilot Junior Series - 30 RQSY 039-045, Option 23 B, Units with and Without Hydraulic Module, with Filter Frame

15
4.4 - 30RQSY 039-045, option 23B, units with and without hydraulic module, with lter frame
Legend
All dimensions are given in mm.
Control box
Water inlet.
Water outlet
B
Required clearances for air ow
C
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
NOTES:
A Non-certied drawings.
Refer to the certied dimensional drawings supplied
with the unit or available on request, when designing
an installation. For the location of xing points,
weight distribution and coordinates of the centre of
gravity refer to the certied dimensional drawings.
B Provide a gutter around the unit to collect the
condensate water or install the accessory
condensate collection pan (30RQSY 039 to 078).
C The unit must be installed level (less than 2 mm per
metre deviation in both axes).
D Units 30RQSY 039 to 078 are equipped with a sleeve
on the air heat exchanger side to allow connection
of a suction air frame.
* Overall dimensions
4 - DIMENSIONS, CLEARANCES