Configuring the system
Carrier Connect™
Wi-Fi Thermostat Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide 16 All rights reserved
1 On the thermostat, not a mobile device, swipe the HOME screen twice to the left to navigate to the MODE
screen and ensure the MODE is OFF.
NOTE The yellow line above a button indicates it is the current MODE.
2 Go to the FAN screen and then press and hold the Fan Button for 5 seconds to get to the SYSTEM
SETTINGS screen.
NOTE You can ONLY access the SYSTEM SETTINGS screens from the thermostat itself, not the app or web.
3 Enter the 3-digit security PIN code, if applicable, to open the SYSTEM SETTINGS screen.
4 Use the advanced options on the SYSTEM SETTINGS screens to configure and setup your system, change,
and view options.
NOTES
○ The yellow Row Indicator at the right side of the screen indicates the current location in the list of
advanced settings options. Swipe up or down to navigate through options and then tap to select one.
○ Swipe on any of the SYSTEM SETTINGS sub-screens to return to the SYSTEM SETTINGS main screen.
To Next Page
Loading...
