Using the Carrier® Connect™ Wi-Fi Thermostat's screens
Carrier Connect™
Wi-Fi Thermostat Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide 33 All rights reserved
DATE and TIME
On this screen, scroll or tap the Orange Hour wheel or Blue Minute wheel to adjust the date and time on the
thermostat.
Switch to the Date Adjust screen and the Time Adjust screen using the green icon button at the right side of the
screen. Scroll or tap the Orange Month wheel or Blue Day wheel.
Drag a wheel up or down or tap the top or bottom of the wheel to increase or decrease by 1 increment.
When the thermostat is first registered and connected to a Wi-Fi router, both the date and time are synced with
the server (based on the location of the phone/tablet used to connect the thermostat to a router or based on the
ISP location if a computer is used to connect the thermostat to a router). The time and date are synced at the top
of each hour automatically, unless the Sync Time To Server option in the SETTINGS > ADVANCED screen is set to
NO.
SOFTWARE screen and BACKLIGHT screen
SOFTWARE — Displays the current software's status.
BACKLIGHT — Use to change the backlight intensity in Active and Dormant modes.
• The blue Active Backlight wheel adjusts the backlight intensity from 10% to 100%, (75% is the default and
recommended) when the thermostat is in an active state (being accessed or viewed by the end user).
• The purple Dormant Backlight wheel adjusts backlight intensity from 0% to 25%, (25% is the default and
recommended) when the thermostat is in a dormant state (not being viewed or adjusted by the end user).
Drag a wheel up or down or tap the top or bottom of the wheel to increase or decrease by 1 increment.
ADVANCED
Use this screen to access and change more advanced settings.
To Next Page
Loading...
