Using the Carrier® Connect™ Wi-Fi Thermostat's screens
Carrier Connect™
Wi-Fi Thermostat Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide 35 All rights reserved
CLEAN
Stops touchscreen interaction for 10 seconds to allow cleaning the screen with a dry nonabrasive cloth. A 10-
second countdown shows on the CLEAN screen and then resumes normal operation.
LOG
You can use this screen to view software update history, fault history, and system events. Swipe up or down on the
vertical yellow Row Indicator to scroll through logged events.
The log includes:
• STARTUP
• SOFTWARE UPDATE EVENTS
• POWER CYCLE EVENTS
• PARAMETER OUT-OF-RANGE EVENTS
• SERVER CONNECTIVITY EVENTS
• NON-VOLATILE MEMORY FAULTS
• TEMPERATURE FAULTS
The list displays the 5 most recent logged events, with the most recent at the top. The last line in the list includes
the RESET LOG command to clear the list. Pressing an event item displays a screen with more information. Press
the BACK button to return to the LOG screen.
STATUS
Displays the current status of
• thermostat outputs
• timers
• stages
• lockouts
Current timer status is displayed and can be cleared for testing and troubleshooting by pressing and holding the
TIMERS text for 5 seconds. Press and hold LOCKOUT TIMERS for 5 seconds to clear timer values for COOL, E
-
HEAT, and HP HEAT.
Scroll the vertical yellow Row Indicator to see more options.
To Next Page
Loading...
