Carrier Connect - Document Revision History

Document revision history
Carrier Connect™
Wi-Fi Thermostat Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide 41 All rights reserved
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
11/3/17
To connect a remote input (sensor or
contacts)
Added diagrams for connecting 4 sensors and for 9 sensors.
C-TS-CP-F/E
10/3/17
Recovering from a power outage
New information.
C-TS-CP-F/E
8/1/17
To configure advanced SYSTEM
SETTINGS
Removed note regarding FAULT INPUT not being available.
C-TS-CP-E-ZL
6/5/17
What is the Carrier Connect™ Wi-Fi
Thermostat?
Added contents of package
C-TS-CP-E-RD
5/9/17
Fault definitions
Added ECONOMIZER FAULT
C-TS-CP-E-RD
To configure advanced SYSTEM
SETTINGS
Added OCCUPANCY and FAULT INPUT to REMOTE SENSOR.
Added OCCUPANCY OUTPUT, OCCUPANCY INPUT, and LINE
FREQUENCY.
C-TS-CP-E-RD
To connect a remote input (sensor or
contacts)
Title changed from To connect a remote sensor.
Power specs now N/A.
Occ contact N.O. and Fault Input N.O. added to sensor graphic.
C-TS
-CP-E
-RD
To wire and mount the thermostat
Prerequisite for the shield and ground wires removed from
document.
C-TS
-CP-E
-RD
* For internal use only
Document revision history