13
• To return to the scheduled program, touch HOLD UNTIL, and then
select PER SCHEDULE.
3.5. Adjusting Heating
NOTE: If OFF is selected, the Heat, Cool, Auto and Fan Only will not
be available. When changing from the OFF mode to Heat, Cool, Auto, or
Fan Only, it is normal for the system to run the blower for a minute or
two. During this time, the system is using the True Sense™ feature to
determine the filter usage. This feature is part of the system design and
cannot be turned off.
• To adjust the heating temperature, enter the Main Screen by touching
anywhere on the Control.
• With the system in either AUTO or HEAT mode, use the Up (Y) and
Down (B) buttons to set the desired temperature.
• On the left hand side of the screen, the comfort profile will switch to
manual, and the system will be placed in a temporary hold.
• Use the Up (Y) and Down (B) buttons to change the time to
temporarily hold the desired temperature in 15 minute increments.
• When the correct time interval is displayed, touch DONE.
• To return to the scheduled program, touch HOLD UNTIL, and then
select PER SCHEDULE.
3.6. Adjusting Cooling
• To adjust the cooling temperature, enter the Main Screen by touching
anywhere on the Control.
• With the system in either AUTO or COOL mode, use the Up (Y) and
Down (B) buttons to set the desired temperature.
• On the left hand side of the screen, the comfort profile will switch to
manual, and the system will be placed in a temporary hold.
To Next Page
Loading...
