33
6.3. Upload My Schedule for Series B
As noted earlier, programming the control with the Carrier® Home
mobile app is the most convenient way. You can program a system that is
not connected to the Internet using a PC or MAC computer using the
process shown, below.
The Upload My Schedule feature with the desktop app will allow you to
upload your schedules from a PC or MAC computer, load those
schedules onto a micro SD card memory device, and upload the
schedules into the Infinity System Control.
NOTE: Use a 4GB to 32GB micro SD memory card. The card should be
formatted for FAT32 (rather than FAT64 or exFAT) in order to be read by
the control.
• To download the MyInfinity application for your computer, go to
www.MyInfinityTouch.com.
– Click on the Downloads tab.
– Download the MyInfinity Desktop application.
– The MyInfinity Desktop application provides you the ability to
create your schedule for the Infinity System Control.
• Once the schedules are complete, insert a micro SD card memory
device into your computer. Add a new folder to the micro SD card
device labeled User. Make sure that this folder is at the top of the
folder chain in the micro SD card; this is also called the “root
directory.”
– Select the Save Schedule to the micro SD card option on the
computer Desktop application Schedules menu. Read the directions
and then select Export.
– Save the schedule file in the User folder on the micro SD card.
– Once that is complete, safely remove the micro SD card from the
computer.
To Next Page
Loading...
