16
• Once you have selected the desired activity for ALL ZONES, you
will have the option to either permanently (HOLD) or temporarily
(HOLD UNTIL) override your programmed schedule.
A14239
– Selecting the HOLD option will permanently override your
programmed schedule until you CANCEL ALL ZONES.
– Selecting the HOLD UNTIL option will allow you to temporarily
override your programmed schedule.
– Once selected, use the Up (Y) and Down (B) buttons to change the
time in 15 minute increments.
– When the correct time interval is displayed, touch DONE.
3.11. Occupancy Override
The integrated motion sensor allows the system to make automatic set
point and activity changes, based on occupancy, to provide the optimum
home comfort and energy savings.
To Next Page
Loading...
