29
5.7. Vacation Comfort Profile Fresh Air Control
• If a ventilator is installed in your home, select the amount of fresh air
to circulate during heating mode by touching HEATING FRESH
AIR.
• You will have the option of choosing between AUTO, MANUAL, or
OFF.
NOTE: This option may not be available with the ERVXXNVA
ventilator due to its simplified Control design.
– The AUTO setting will allow the user to choose the maximum
fresh air that the ventilator will provide. Selections are Low,
Medium or High.
– The MANUAL setting allows you to select the percentage of fresh
air to supply to your home.
– Use the Up (Y) and Down (B) buttons to set the desired
ventilation level.
– Press SAVE when finished, or CANCEL to discard any changes.
• If applicable, select the amount of fresh air to circulate during cooling
mode by touching COOLING FRESH AIR. Again, you will have the
option of choosing among AUTO, MANUAL and OFF.
– Use the Up (Y) and Down (B) buttons to set the desired
ventilation level.
– Press SAVE when finished, or CANCEL to discard any changes.
6. Schedules for Series B
Program your Infinity System Control by selecting the SCHEDULES
icon. You may select to use the guided scheduling feature, view or edit
your schedule or upload your schedule from a micro SD memory card.
The most convenient way to program your control is using the Carrier®
Home mobile app. See the WIRELESS section for more details on
connecting your product to the Internet.
To Next Page
Loading...
