37
operating. A message stating, “System Check in Progress” means that the
system is performing its normal 1 p.m. Filter check. This also happens
any time the system mode is changed from Off to Auto, Heat, Cool, or
Fan Only. When you are finished looking at the operating status, press
the DONE button to return to the previous menu.
When simultaneous heat/cool demand is enabled, this screen will display
an information message at this location. This includes the following
messages:
A160190
9.2. Accessories Status
Within the accessory status, you can view how much of each accessory
has been consumed, and reset the counter for each accessory.
• To reset the counter for your installed accessory, touch the RESET
button, then press SAVE.
• To return to the previous menu, press CANCEL.
A12108
To Next Page
Loading...
