67
20. Utility Demand Event Response Setup
This section is only applicable if your utility company is running a
demand response or price response program in which you have agreed to
participate. Contact your local electrical utility company for information
about programs in your area.
NOTE: If you wish to participate with your electrical utility company, a
service person or Utility representative must enable the utility event
interface.
A170236C
20.1. Utility Event
Your utility may send price response or demand response events to your
Wi-Fi connected Infinity System Control. When a price response or
demand response event is received, your temperature set points will be
automatically adjusted depending on the utility event setup settings that
you have selected.
20.2. When a utility event is in progress…
• The temperature set points will be automatically adjusted depending
on the utility event setup. The adjusted heating and cooling
temperatures will be displayed in green on the Main Screen along with
a “utility event” message.
• A utility event icon will appear on the home screen. Pressing the icon
or manually adjusting the heating and cooling set points will display
To Next Page
Loading...
Need help?
General
