Carrier Touch Pilot Junior - Modifying Unit Parameters; Overriding System Configuration

14
General unit parameters
The General parameters screen provides access to a set of
general unit parameters.
To access the General parameters screen, go to the Main
menu and select General Parameters
1
1 Forceable point
Press the Up/Down buttons
to navigate between
the screens.
5.10 - Modify unit parameters
The Conguration menu gives access to a number of
user-modiable parameters such as pump conguration,
schedule menu, etc. The Conguration menu is password-
protected (see also section 5.8.1).
Press the eld corresponding to the parameter to be
modied and introduce all the necessary changes.
Press the Up/Down buttons
to navigate between
the screens. Once all the necessary modications have
been made, press
to conrm or to cancel
changes.

In some cases it is possible to override system
conguration. The override screen provides the option to
issue the command overriding the current operation of the
unit.
To access the override screen, press the forceable point of
the data screen. Note that not all parameters can be
overridden by the control.
①
②
③
1 Forced value
2 Set force
3 Auto