a. Changing IntelliSets - With "=" Key Enabled
COO L DEFROST ALARM START-STOP
ERUTAREPMETXOBTNIOPTES
ALARM LIST
SELECT
MANUAL
DEFROST
SUOUNITNOCTAEH
EVITCASELPPA
START--STOP/
CONTINU OUS
1. PRESS the ”=” Key to display current IntelliSet.
2. Pressing the UP or DOWN ARROW key, to move through the IntelliSet List. The current
IntelliSet will have either ACTIVE or MODIFIED to the right of the name.
3. To useadifferent IntelliSet, bring the desired IntelliSet into the MessageCenter and
press the ”=” Key.
NOTE: If pressing the “=” key does not
bring up the IntelliSet message the mi-
croprocessor is not configured with this
feature. To view IntelliSets, refer to the
following section.
+34.5° F
+34.0
To Next Page
Loading...
