2-2
62-11039
Table 2 -3. Additional Support Manuals
Manual Number
Equipment Covered Type of Manual
62--11038 Vector 1800MT & 06D Compressor Service Parts List
62--11040 Vector 1800MT Operator’s Manual
62--11041 Vector 1800M Easy To Run
62--11095 CT4-134DI-E2B Engine Parts List
62--10865 CT4-134DI-E2B Engine Workshop Manual
2.2 GENERAL DESCRIPTION
The VECTOR 1800MT unit is a hybrid diesel/electric,
fully charged, pre-wired, refrigeration/heating
“nosemount” unit used in conjunction with one or two
remote evaporators. The unit is used on insulated
trailers to maintain cargo temperatures within very close
limits.
Electrical power is supplied to the unit from a power plug
or by the diesel engine / A-C generator which is driven
by the engine. The generator provides 599V/3Ø/60Hz
power when the engine is in high speed and
300V/3Ø/45Hz in low speed .
The control system is a microprocessor controller. Once
the controller is set at the desired temperature, the
system automatically selects cooling and heating cycles
as necessary to maintain the desired temperature within
very close limits.
To Next Page
Loading...