Carrier VECTOR 1800 MT - Figure 8-19 Generator Assy

8-1662-11039
21.
22.
23.
21. Install the lifting tool (P/N :07--60085--00).
22. Remove the remaining stator bolts.
23. Remove the generator with a sling.
21.
Figure 8 --18 Generator Removal
8.9.5 Generator Assembly Procedure
8
4
5
1
2
3
15
6
9
11
13
12
7
9
10
14
1. Screw, Stator
/
Cover
2. Washer, Stator/Cover
3. Fan Cover
4. Fan Mount Screw
5. Fan Mount Washer
6. Rotor
7. Stator
8. Spacer
9. Dowel Pin
10. Bell Housing
11. Flywheel Bolt
12. Fan
13. Generator Leads
14. Access Cover
15. Grommet
Figure 8--19 Generator Assy (P/N 54--00553--51)