Carrier VECTOR 1800 MT - Page 242

62-11039
7-111
Alarm
NO.
Steps ALARM / CAUSE CORRECTIVE ACTION
225 GENERAL MAINTENANCE DUE
• TRIGGER–ON: The General Maintenance Hour Meter time has expired.
T
R
I
G
G
E
R
O
N
:
T
h
e
G
e
n
e
r
a
l
M
a
i
n
t
e
n
a
n
c
e
H
o
u
r
M
e
t
e
r
t
i
m
e
h
a
s
e
x
p
i
r
e
d
.
• UNIT CONTROL: Alarm Only. Alarm Light will NOT be turned on.
• RESET CONDITION: Alarm may be manually reset via keypad.
1. Check Unit Maintenance Records
a. Schedule unit into service facility for
maintenance
Must be done soon!
2. Perform Maintenance
a. Perform appropriate engine & unit
maintenance
Follow instructions on proper maintenance form
3. Reset General Maintenance Hour Meter
a. Check that the General Maintenance
Hour Meter interval is set for your
requirements.
b. Reset General Maintenance Hour
Meter for the next service interval
Reset Interval in Configuration List as required.
Hour Meter is reset in the Functional Parameter list.
Follow maintenance interval recommendations in Section
8.1.
226 SERVICE SOON--PM #1 DUE
• TRIGGER–ON: The Maintenance Hour Meter #1 time has expired.
G
G
O
e
a
t
e
a
c
e
o
u
e
t
e
#
t
e
a
s
e
p
e
d
• UNIT CONTROL: Alarm Only. Alarm Light will NOT be turned on.
• RESET CONDITION: Alarm may be manually reset via keypad.
1. Check Unit Maintenance Records
a. Schedule unit into service facility for
maintenance
Must be done soon!
2. Perform Maintenance
a. Perform appropriate engine & unit
maintenance
Follow instructions on proper maintenance form
3. Reset Maintenance Hour Meter #1
a. Check that Maintenance Hour Meter
#1 interval is set for your
requirements.
b. Reset Maintenance Hour Meter #1 for
the next service interval
Reset Interval in Configuration List as required.
Hour Meter is reset in the Functional Parameter list.
Follow maintenance interval recommendations in
Section 8.1.