EasyManua.ls Logo

Carrier VECTOR 1800 MT - Page 82

Carrier VECTOR 1800 MT
315 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62-11039 3-32
a. Changing IntelliSets -- With ā€œ=ā€ Key Enabled
COOL DEFROST ALARM START-STOP
SETPOINT BOX TEMPERATURE
ALARM LIST
SELECT
MANUAL
DEFROST
HEAT CONTINUOUS
APPLES ACTIVE
+36 F
+36
START--STOP/
CONTINUOUS
1
1. PRESS the = Key to display current IntelliSet. (Enable IntelliSet
at = Key must be configured ON. See Section 5.2.1.)
2. Pressing the UP or DOWN ARROW key, to move through the IntelliSet List.
The current IntelliSet will have either ACTIVE or MODIFIED to the right of
the name.
3. To use a different IntelliSet, bring the IntelliSet you wish to use into the
MessageCenter and press the = Key.
NOTE: If pressing the = key does not
bring up this message, press the
SELECT key until the message appears.

Table of Contents

Related product manuals