4 ZP3 Fire Panel User Guide
Type 54 emulation
Type 54 emulated devices improve functionality: A type 54 emulated device can
be mapped to disable any other line device. This is reported on the panel as an
event and updated in the Event archive.
The ZP3 panel, when fitted with the software shown in the specification supports
the following sensors and devices.
Table 3: Supported sensor and device models
Description
-2 Single interface module
-1 High voltage relay module
-2 Line isolator module
-2 Line relay module
-2 Conventional interface module
Ionization smoke sensor
Combination smoke/thermal sensor
Optical smoke sensor
-2 Thermal sensor (Grade 2)
-3 Thermal sensor (Class A1)
-2 Manual “breakglass” call point (indoor)
-3 Manual “breakglass” call point (indoor, 3 second response)
Manual “breakglass” call point (outdoor)
Interface unit, multifunction (fire/non-fire/security)
Interface unit
Loop relay
Loop sounder
Weatherproof horn sounder
Horn sounder
-2 Addressable stand-alone beacon
-3 Addressable sensor base sounder/beacon
Loop sounder with base
Loop remote LED
Loop radio communication module
-1 Wireless (radio) optical smoke sensor*
-1 Wireless (radio) thermal smoke sensor*
-2 Wireless (radio) combination sensor*
Wireless (radio) call point
Wireless (radio) interface I/O unit
Intrinsically-safe smoke sensor
Intrinsically-safe thermal sensor
To Next Page
Loading...