ZP3 Fire Panel User Guide 1
System overview
The ZP3 is a complete intelligent fire detection system designed to protect life
and property. Each system is an individual design, based upon modular ZP
components. The ZP3 detects the presence of smoke or fire, raises alarms, and
accurately indicates the location of the fire. Depending on the features built into
the system, it can also:
• Raise local and remote alarms
• Call the fire brigade
• Activate building systems (including automatic fire extinguishing systems)
The system can prevent the spread of smoke, gases, and fire, and display the
alarm situation graphically on a computer.
The ZP3 Fire Control Panel is the main component of a ZP3 system. Figure 1
below shows a typical ZP3 fire detection system schematic. Various devices can
connect to the ZP3 Fire Control Panel, these include:
• Fire detectors
• Smoke detectors
• Manual call points
• Alarm sounders
• Local and remote indicating panels
• Graphics display computers
• LED mimic panels
• Other devices
Figure 1: Typical ZP3 system schematic
Remote manned
centre
ZP-NET
To other
ZP3 panels
To other
ZP3 panels
To Next Page
Loading...