Carrier Ziton ZP3 - Operator Menu; Introduction; Menu Access

28 ZP3 Fire Panel User Guide
Operator menu
Introduction
The panel has built-in software functions for carrying out routine operator
functions and system checks. These functions are accessed via the operator
menu, using the panel keypad. This section describes these functions and how to
use them.
When using a menu, the LCD screen displays the menu items in place of any
alarms or events that would normally appear on the screen.
The operator menu is used for the following functions:
• To set the time and date
• To identify which version of software is installed in the panel
• To test the fascia illuminated LED indicators and fascia keypad
• To view or print reports of the status of the system, or individual devices
• To view or print previous alarms
Menu access
Access to the menus is via the panel keypad (see Figure 13 below). Each button
is described in Table 16 on page 29.
Keypad
Figure 13: Keypad
1
ABC
2
DEF
3
GHI
F1
F2
4
JKL
7
STU
8
VWX
0
[ ]
9
YZ
5
MNO
6
PQR
ESC