ZP3 Fire Panel User Guide 5
Description
Intrinsically-safe call point
Intrinsically-safe interface unit
-ECU Extinguishing control units
High sensitivity aspirating smoke detectors
Multisensor fire detector (optional)
Used with the ZP471A and ZP472A Radio interface units only (see “Total Loss of Power alarm”
Later versions of software may support additional or different devices. If in doubt,
check with your local supplier.
Maintenance features
A range of maintenance features simplifies and improves system maintenance.
These include status reports, contamination and near-service reports, operational
statistics, and a zone walk test and sounder test. The system can manually
disable zones or individual points for maintenance purposes.
Remote diagnostics
Remote diagnostics is available as an option, enabling some or all (depending on
software version) maintenance functions to be carried out from a remote location.
Automatic diagnostics
Automatic diagnostics continuously monitor the system for correct operation,
features include:
• Automatic checking of wiring and points
• Corrupt data detection
• Disconnection of faulty or corrupt zones
• Automatic testing of sensor operation
• Verification of sensor or zone location
Sensors are automatically subjected to a self-test at regular intervals, and vital
elements of the system, such as the software configuration data and running
data, are verified every hour.
To Next Page
Loading...