iv ZP3 Fire Panel User Guide
European standards for fire control and indicating
equipment
These control panels have been designed in accordance with European EN 54-2,
and EN 54-4 standards. In addition, they comply with the following EN 54-2
optional requirements.
Table 2: EN 54-2 optional requirements information
Description
Output to fire alarm devices (output to C)
Output to fire alarm routing equipment (output to E)
Delays to outputs
Dependencies on more than one alarm signal (type B)
Alarm counter
Fault signals from points
Total loss of the power supply
Output to fault warning routing equipment (output to J)
Disablement of addressable points
Test conditions
General requirements
Indication of the test condition
Indication of zones in the test state
Standardized Input/output interface
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND INSTALLATION BY
QUALIFIED PROFESSIONALS. CARRIER FIRE & SECURITY B.V. CANNOT
PROVIDE ANY ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER” OR “AUTHORIZED
RESELLER”, IS PROPERLY TRAINED OR EXPERIENCED TO CORRECTLY
INSTALL FIRE AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and product safety information,
please check https://firesecurityproducts.com/policy/product-warning/ or scan the
QR code:
To Next Page
Loading...