ZP3 Fire Panel User Guide 29
Table 16: Keypad description
Name Description
Numeric buttons Used to enter the number sequences
Menu button Gives access to the Main Menu
Enter button Used to confirm data entry and save data
Escape button Exits a function and returns to the previous
level
Home button Exits all menus and returns to the system
home screen or event screen (if an event is
present)
Function buttons Used within certain menus
Navigation buttons Used to move left, right, up, or down
Operation
The Main Menu is the entry point to all of the user operator accessible software
functions. To access the main menu:
1. Press the Menu button on the keypad. The display shows the following
screen.
2. Press the 1 button on the keypad to choose the Operator item, which displays
the Operator menu. The following screen appears.
The menu name is displayed on the top line, and the menu items are shown with
numbers alongside. Menu items are selected by pressing the numeric button that
matches the item number. Selecting a menu item may cause another menu to
appear or may carry out a particular function. The operator may be prompted to
enter the required information via the keypad.
Any menu can be cancelled and the previous menu presented by pressing the
Escape button. The Escape button is used to cancel or abort the current activity
and return to the previous activity.
Exit the menu system completely by pressing the Home button. This returns the
panel to its normal operation display or event screen. The system has a built-in
time-out so that it cannot be inadvertently left in menu mode. The time-out starts
from the last keypress. In a menu selection, the time-out is approximately
To Next Page
Loading...