ZP3 Fire Panel User Guide 31
Table 18: Reports to display
Operator > Reports to display
This menu provides a selection of reports to view on the LCD. Report
messages can be scrolled manually.
This option lets you view the status report of any device attached to the
panel Z-loops on the LCD. The report shows the type, sensitivity, zone,
and condition of the point.
This option displays the panel software number and version on the LCD.
Press F1 to see the software version of the peripheral boards.
This option lets you view previous alarms and events on the LCD screen.
These events are stored as archives in the panel. The panel automatically
stores the last 1,000 events, together with the date and time of each. The
menu allows the events to be selected by date, and viewed accordingly.
Use the Up or Down buttons to display the previous or next archived
message or event.
us This option displays status information of outputs and points. Options are
available to limit the report to disabled points, or Extinguishing Control
Units (ECUs).
Table 19: Reports to printer
Operator > Reports to printer
This menu provides a selection of reports to print.
This option lets you print previous alarms and events, which are stored as
archives in the panel. The panel automatically stores the last 484 panel
events, together with the date and time of each event. These events can
be selected by date. The printout includes all event types configured for the
printer.
This option lets you print the status of any device attached to the panel Z-
loops. The printer can also be stopped from this menu.
This menu option lets you end the current print operation.
Table 20: Lamp test
Operator > Lamp test
This function illuminates all panel fascia LEDs for a short period, including
the display, allowing the operator to verify that they are functional.
Table 21: Keypad test
Operator > Keypad test
This menu initiates a Keypad test. Once selected, the panel reports any
button pressed on the panel via the LCD. The operator can use this
function to check that the keypad is functional. Press any button twice to
exit.
To Next Page
Loading...