To Next Page

To Previous Page

31 // GB

Output 1: Left indicator

Output 2: Light 1

Output 3: Light 2

Output 4: Right indicator

Brief in range A: Switches the left indicator on or off (memory)

Long in range A: Switches light 1 on or off (memory)

Long in range D: Switches light 2 on or off (memory)

Brief in range D: Switches the right indicator on or off (memory)

Here, the indicator is not controlled via the steering, but via a separate channel, with a 3-position switch. If the indicators are switched on, they remain on until the indicator is activated again.

In addition to the indicators on the right and left, 2 additional outputs can be switched for 2 lights that can be switched completely separately.

The two indicators do not switch one another off in this mode! This way, a hazard light can be implemented by switching on both indicators one after the other.

The intermediate ranges B and C are not evaluated in this mode.

Assignment of the outputs:

Function control:

MODE 13: INDICATOR (MEMORY), LIGHT 1, LIGHT 2

Left indicator

Light 1

Right indicator

Light 2