CARVIN SL - Technical Specifications and Accessories

12. Studio / Live series consoles specs & accesories
All specs measured on (56 Channels Frame)
20-20kHz, Rs=150Ω, RL=600Ω.
unless otherwise noted.
_
Total Harmonic Distortion
Channel Fader @ nominal
Master Output = +14Dbu
Frequency 20 - 20kHz @ 1kHz
+10DBu Mic Input <.006 % .002 %
0 DBu Mic Input <.006 % .002 %
-20 DBu Mic Input <.008 % .003 %
+10DBu Tape Input <.006 % .006 %
0 DBu Tape Input <.015 % .015 %
MIC IN to Direct out +14Dbu <.003 % .002 %
_
Frequency Response
Channel mic in to
Master out = 10Hz - 60kHz ±1DB
Master out > 10Hz - 100kHz +1DB -3DB
_
Hum and Noise
(input gain @ maximum, input sensitivity -55DB)
Equivalent input noise <-128 DBu
Residual output noise < -106 DBu
Master fad nom. one ch nom. < -70 DBu
Common mode rejection < -76 DBu @1kHz
Crosstalk
Adjacent channels < -80DBu @ 1kHz
Mic - master output L to R < -65DBu @ 10kHz
Voltage Gain
Mic in to master output > 84DB
Tape in to master output > 30DB
Mic in to direct out > 77DB
Channel EQ
Low Cut 12DB /octave75Hz
HIGH: Shelving ±15DB @ 12kHz
HI MID: Peaking ±15DB @ 200 - 5kHz, Q = 0.67
LO MID: Peaking ±15DB @ 80 - 2kHz, Q = 0.67
LO : Shelving ± 15DB @ 75Hz
Channel Peak indicators
Full brightness @ -3DB < clip
Phantom Power
+48V available at all balance XLR microphone inputs
Accesories
AN24 Touring case
AN40 Touring case
AN56 Touring case
G12V 12V XLR light
SLP5600 120v Spare Power Supply
SP10 10’ Speakon™ power cable
SP25 25’ Speakon™ power cable
SL-88001 8 channel input card
SL-88004 main output card
SL-88005 main meter bridge card
SL-88006 channel meter bridge card
27
contact Carvin at 800-854-2235 to order, or visit www.carvin.com