CAS PB Series User Manual

11
5. How to Use Print (Option)
5-1. Mode Change
You can use print out function. Print Out Mode has total 5 stage.
Each Stage is “NOSEND, K-SEND, S-SEND, U-SEND, C-SEND
5-2. K-Send
1)Mode Setting
- This Print Mode is ‘Command Mode’. First of all, You must scale’s mode setting.
Please refer to the page 10.
2)Print Opreation
①Place a commodity on the
platter, then the display will
show the weight of the
commodity.
② If you press the key,
You can see the “SUM”
message and Current weight
and then you can send the
weight to the printer.
③Place a another
commodity on the platter,
④ Press the key, You
can send the another weight
to the printer.
⑤ Remove container and
commodity, then display will
show the"0.00".
⑥Press the key, Total
weight is send a printer.

CAS PB Series Specifications

General

Display	LCD
Overload Protection	Yes
Units	g, oz
Interface	RS-232 (optional on some models)
Auto Calibration	Yes
Operating Temperature	10°C to 40°C
Material	Stainless steel platform, ABS housing