CAS PB Series - Page 12

12
3)Print Out
5-3. S-Send
1)Mode Setting
- This Print Mode is ‘Stable Mode’. Please refer to the page 10.
2)Print Opreation
3)Print Out
①Place a commodity on the
platter, then the display will
show the weight of the
commodity.
② If weight is stable state,
You will see on display
and then you listen to the
buzzer sound one time.
③ Remove container and
commodity, then You can
print another commodity
weight.
K-send MODE
=>Command Mode
Count Weights/kg
1 25.80
2 19.50
----------------
Sum Total 45.30
S-SEND MODE
=> Stable Mode
25.80