CAS PB Series User Manual

13
5-4. U-Send
1)Mode Setting
- This Print Mode is ‘Continue Mode’. Please refer to the page 10.
2)Print Opreation
① Place a commodity on the
platter, then the display will
show the weight of the
commodity. The weight is
send to the printer continually.
② Remove container and
commodity, then display will
show the"0.00".
3)Print Out
U-SEND MODE
=> Continue Mode
25.80
25.80
25.80
25.80
0.00
0.00
0.00
0.00

CAS PB Series Specifications

General

Display	LCD
Overload Protection	Yes
Units	g, oz
Interface	RS-232 (optional on some models)
Auto Calibration	Yes
Operating Temperature	10°C to 40°C
Material	Stainless steel platform, ABS housing