E550 - E550 CR - E550 PM - E550 PM CR Automatic Single-Side Edgebander Rel. 1.1.1
28
Starting procedure
The “Starting Procedure” instruction sheet is supplied together
with the Use and Maintenance Manual.
This procedure IS NOT A SUBSTITUTE for the manual, but
gives instead only a rapid summary of the operations necessary
for the CORRECT starting and/or use of the machine.
CORRECT starting and use avoids lost time and damage to the
machine.
A copy of the starting procedure identical to the one indicated by
the arrows is supplied separately inside the box of the Use and
Maintenance Manual.
The starting procedure copy has been laminated in plastic, and
it should be posted in a position where it can be read by all
persons working with the machine.
To Next Page
