6 8305557-R2
INSTALLATION
FK0637.ai
FK0633.ai
2
3
Lock Forks
If equipped, reinstall fork bar keepers
Refer to the attachment's installation instructions for
torque values.
4
Install battery packs
A Lift up battery holder locking clip.
B Position battery pack.
C Click into the battery holders.
D Secure the locking clips down.
A
B
C
D
NOTE: For rotators, shake forks to
verify the pin is fully engaged in the
fork bar notch.
CAUTION: Pin must engage notch.
Keepers
FK0636.ai
To Next Page
Loading...
Need help?
General
