Cascade E-Series - Recommended Hydraulic Supply Options

215204 Rev. 1 3
I
NSTALLATION
2.2 Recommended
Hydraulic Supply
Options
E-Series Clamps provide the best performance with one of
the hydraulic supply arrangements shown below. Refer to
Cascade
Hose and Cable Reel Selection Guide , Part No.
212119, to select the correct hose reel for the mast and
truck. The hose and fitting requirements are:
• All hoses and fittings for CLAMP and SIDESHIFT
functions should be at least No. 6 with a minimum
internal diameter of 9/32 in. (7 mm).
Non-Sideshifting
A or B
RH or LH THINLINE
™
2-port hose reel group.
OR
C
Mast single internal hose reeving group.
Sideshifting
A and B
RH and LH THINLINE
™
2-port hose reel groups.
OR
C
Mast double internal hose reeving group.
Sideshifting with Solenoid
A
6-N-1 cable/hose reel group.
OR
A and C
Cable reel and single internal hose reeving group.
B
A
GA0033.ill
C