EasyManuals Logo

Case IH AXIAL-FLOW 2588 User Manual

Case IH AXIAL-FLOW 2588
479 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
4 - INSTRUMENTS/CONTROLS
33
16. ENGINE DIAGNOSTIC INDICATOR -The
indicator will illuminate when the electronic
controller detects a non-critical fault condition.
17. ENGINE STOP INDICATOR - The indicator will
illuminate when the electronic controller detects
a critical fault condition telling the operator to
stop. In addition an audible alarm will sound.
18. INTAKE AIR MANIFOLD TEMPERATURE
INDICATOR - At high temperature there are two
levels of warning.
A. First level - 82
°C (180° F) will illuminate
indicator (18) and sound alarm for 5
seconds.
B. Second level - 88
° C (190°) will illuminate
indicator (18) and (17) and a continuous
alarm will sound.
The intake manifold air temperature must
decrease and maintain a level below 88
° C (190°
F) for 10 seconds to turn off the Stop Engine
lamp, Alarm Enable. The intake manifold air
temperature must decrease and maintain a level
below 82
° C (180° F) for 10 seconds to turn off
the high air intake manifold indicator.
Turn OFF the engine and remove key. Check air
filter and air screen. Start the engine. If the
indictor still illuminates and the audible alarm
sounds, DO NOT operate the engine. See your
dealer.
19. WATER IN PRIMARY FUEL FILTER
INDICATOR - Will illuminate when water needs
to be drained from the primary fuel filter.
ENGINE GRID HEATER
Engine Grid Header - Lamp (1) will illuminate at
temperature of 19° C (66° F) or less. When intake air
is heated and engine is ready to crank, lamp will go
out. Lamp may flicker in colder conditions until
engine warms up.
RD02H009
RH05F041
19
18
17
16
16
17
18
19
1

Other manuals for Case IH AXIAL-FLOW 2588

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Case IH AXIAL-FLOW 2588 and is the answer not in the manual?

Case IH AXIAL-FLOW 2588 Specifications

General IconGeneral
BrandCase IH
ModelAXIAL-FLOW 2588
CategoryFarm Equipment
LanguageEnglish

Related product manuals