5 - OPERATING INSTRUCTIONS
85
Coolant Heater
An Engine Block Coolant Heater is available from
your dealer.
TRANSPORTING PREPARATIONS
1. Empty the grain tank.
2. Swing the unloader tube into the transport
position. If transporting long distances, 16 km (10
miles) or more, install the hairpin clip (1) to hold
the unloader tube in place
3. Raise the header high enough for good ground
clearance.
4. Pivot the Extremity Wide Clearance Lamps back
toward back of machine as shown below. Lock in
place with hair pin provided.
RD02E206
A1013S45
RD02G057
1
To Next Page
Loading...
Need help?
General
