GENERAL
This manual has been prepared to assist you in the correct procedure for running in, driving, operating, adjusting
and maintaining your new machine.
This machine has been designed and built to give maximum performance, economy, safety and ease of
operation under a wide variety of crops and conditions.
Prior to delivery, your machine was carefully inspected both at the factory and by your dealer to ensure that it
reaches you in optimum condition. To maintain this condition and ensure trouble-free operation it is important
that routine services, as specified in this manual, are carried out at the recommended intervals.
Before attempting to drive or operate your machine, read this manual carefully (especially chapter covering the
Safety Precautions) and keep it in a convenient place for future reference.
”Left” and ”right” used throughout this manual are determined from the rear, facing in the direction of travel of
the machine during operation.
If at any time you require advice concerning your machine, do not hesitate to contact your authorised dealer.
Who have factory-trained personnel, genuine service parts and the necessary equipment to carry out your
service requirements.
IMPORTANT:
This machine has been designed and built according to the laws of your country. Always use genuine CASEIH Service Parts
when servicing and repairing your machine and do not modify your machine without a written permission of the
manufacturer. Failure to do so will void the responsibility of the manufacturer.
Check local road legislation before driving the baler on public roads.
As this publication is distributed throughout our international network, the equipment illustrated, either as
standard or as an accessory, may vary according to the country in which the equipment is to be used. Low cost
configurations, as chosen by the customer, may deviate from specifications given.
Several illustrations in this manual show the safety guarding, open or removed to illustrate better a particular
feature or adjustment.
The machine must not be used in this condition. For your own safety, ensure that all guards are closed or
replaced before operating the machine.
OWNER ASSISTANCE
We at CASEIH and your CASEIH dealer want you to be completely satisfied with your investment. Normally
your dealer's Service Department will handle any problems with your equipment. Sometimes, however,
misunderstanding can occur. If your problem has not been handled to your satisfaction, we suggest contacting
the owner or General Manager of the dealership, explaining the problem, and requesting assistance. When
additional assistance is needed, your dealer has direct access to our branch office.
IMPROVEMENTS AND CHANGES
The company is continually striving to improve its products, and therefore reserves the right to make
improvements and changes when it comes practical and possible to do so, without incurring any obligation to
make changes or additions to the equipment sold previously.
All data given in this book is subject to production variations.
Important: operating and service messages displayed on the electronic operating panel may vary from what is
shown in the Operator's Manual. Should this occur adhere to the latest instruction on the electronic operating
To Next Page
Loading...