SECTION 2 - CONTROLS, INSTRUMENTS AND
OPERATION
2ï18
NOTE: It is possible to convert the hitch set‐up to the high
hitch set‐up by turning the neck parts upside down and
changing the position of the mid‐ship bearing mount.
• However, since the baler is equipped with a ball ring or
a swivel ring hitch insert, this part will need to be
replaced with a fixed ring hitch insert to match the
tractor swivelling upper tow hook, set to swivel,
thereby permitting the baler to articulate relative to
the towing tractor. Call your dealer for assistance and
required parts and verify for possible legal
implications (regulations) of this conversion, in your
country.
25
To Next Page
Loading...