Case IH LB323 - Page 49

SECTION 1 - GENERAL INFORMATION AND SAFETY
1ï15
19. DANGER
Needle frame can move without putting hay in baler.
- SHUT OFF PTO and tractor engine- Engage needle
lockout before threading needles or adjusting twine
tensioners. Failure to comply will result in death or
serious injury.
Location: Left side of baler.
20. Warning: Beware of moving knotter fans
Location: Top of knotter fan guard
21. Knotter timing decal
IMPORTANT: Refer to the Operator's Manual for retiming
of the knotter system, after a shearbolt change.
Location: Left hand side of baler
engaged to prevent any unexpected needle
Lock
arm (1) is used to secure the knotter clutch in its
home position.
The safety lock is accessible from the service ladder.
Prior to operating the baler in the field, remember to
disengage the lock arm.
84819756
19
84015359
20
84790420
21