Case IH LB323 - Page 51

SECTION 1 - GENERAL INFORMATION AND SAFETY
1ï17
1. Ensure the baler is not running
2. Open the side access door.
3. Loosen wing nuts (1) and remove inspection door
(2).
26
Ensure the baler is stopped. Always mount and leave
the machine in a safe way (i.e. use steps (1) and 27 handgrips (2) and (3) of the service ladder and maintain a 3-point
contact at all times).
Before mounting the machine, read the following
warnings first:
1.
Ensure the baler is not running.
2.
Engage the flywheel brake.
3.
Release safety latch (1).
4.
Pull the access door open.
25