19990401
1-6 Program (PRGM) Menu
To display the program (PRGM) menu, first enter the RUN
•
MAT or PRGM Mode from the
Main Menu and then press !J(PRGM). The following are the selections available in the
program (PRGM) menu.
• {Prog } ........ {program recall}
• {JUMP} ...... {jump command menu}
• {?} .............. {input prompt}
• {^} ............. {output command}
• {I/O} ............ {I/O control/transfer command menu}
• {IF } ............. {conditional jump command menu}
• {FOR} ......... {loop control command menu}
• {WHLE }...... {conditional loop control command menu}
• {CTRL} ....... {program control command menu}
• {LOGIC} ..... {logical operation command menu}
• {CLR } ......... {clear command menu}
• {DISP} ........ {display command menu}
• {:} ............... {multistatement connector}
The following function key menu appears if you press !J(PRGM) in the RUN
•
MAT
Mode or the PRGM Mode while binary, octal, decimal, or hexadecimal is set as the default
number system.
• {Prog}/{JUMP}/{?}/{^}/{:}
• {=
GG
GG
G <} ....... {relational operator menu}
The functions assigned to the function keys are the same as those in the Comp Mode.
For details on the commands that are available in the various menus you can access from
the program menu, see “8. Programming”.
1-6-1
Program (PRGM) Menu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
