29
EJECT button
Bottom
Top
3. Slide the card release to the Free position.
4. If there is already a card in the slot, use the stylus to press the EJECT button straight
down, and remove the card.
5. Slide the card you want to use into the card slot.
• Make sure the top of the card is facing towards the top of the CASSIOPEIA unit. A
card that is not oriented correctly will not slide all the way into the slot.
Carefully slide the card into the slot as far as it will go.
6. Re-attach the card slot cover to the CASSIOPEIA.
• If you are using a digital camera card or another type of card equipped with a lock,
slide the card lock to the LOCK setting to secure the card in place.
Infrared Communications
The infrared port of this unit can be used to exchange data with another CASSIOPEIA,
or with another device equipped with infrared communication capabilities. Remember
that the two infrared ports must be pointed directly at each other when performing
communications. The distance between the two infrared ports must be less than 30 cm.
See the Pocket PC User’s Guide for full details on performing infrared communications.
For infrared data communications with another device, the other device must conform
with IrDA 1.1 standards, and it must specifically support infrared data communication
with a CASSIOPEIA.
To Next Page
Loading...
Need help?
General