35
Using the AC Adapter/Charger (CH-C59200U)
As its name suggests, the AC Adapter/Charger functions as both a charger for the
battery pack and as an AC adapter.
■ To charge a battery pack mounted on the AC adapter/charger
1. Plug the AC adapter/charger into a wall outlet as shown in the illustration.
2. Mount the battery pack onto the AC adapter/charger.
• Charging starts automatically when you mount the battery pack onto the AC adapter/
charger.
• The amount of time it takes to achieve a full charge depends on whether the AC
adapter/charger also being used to power the CASSIOPEIA by attachment with the
DC power cord. An M Type battery pack (JK-210RBM) takes about five hours to
reach a full charge with normal (non-rapid) charging when the CASSIOPEIA is being
used to perform an operation that consumes a large amount of power.
• Avoid using the AC adapter/charger to power the CASSIOPEIA while rapid charge is
in progress. Connecting the AC adapter/charger to the CASSIOPEIA can cause rapid
charging to switch automatically to normal charging.
AC power cord
CHARGE indicator
Lights red while charging is in
progress, and turns green when
charging is complete.
RAPID CHARGE indicator
Lights red while rapid
charging is in progress.
Chargeable battery pack
EJECT switch
To Next Page
Loading...
Need help?
General