39
Use the following procedure to place the unit onto the cradle.
1. Place the cradle on a desk or other flat, level surface.
2. Turn off the CASSIOPEIA.
3. Place the CASSIOPEIA onto the cradle as shown in the illustration.
4. Orient the CASSIOPEIA in relation to the cradle as shown in the illustration below.
Important
• Align the CASSIOPEIA properly with the grooves and slide it into the cradle as far
as it will go.
To remove the CASSIOPEIA from the cradle
Slide the CASSIOPEIA straight up from the cradle.
To Next Page
Loading...
Need help?
General