33
4. Press the [Action] control again.
• This starts the full reset operation, which deletes all data in memory.
• Pressing the [Action] control displays the Startup screen. The remainder of this
procedure identical to the Initial Setup described in the Quick Start Guide. Perform
the steps of the Initial Setup procedure.
You can abort the full reset operation while the messages in steps 2 and 3 are on the
display by pressing the [Record] button.
Errors Following a Full Reset
If errors continue to persist even after you perform a full reset, it can mean that your
CASSIOPEIA is defective. Contact your original dealer or an authorized CASIO
service provider to request servicing.
To Next Page
Loading...
