145
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July, 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 119).
• Time stamping is disabled when certain BEST SHOT scenes are being used.
Procedure
[MENU] * Set Up Tab * Stamp Place
See page 96 for details.
Procedure
[MENU] * Set Up Tab * Time Auto Correct
See page 108 for details.
Time Stamping Snapshots (Timestamp)
Date 2012/7/10
Date&Time 2012/7/10 1:25pm
Off No stamping of date and/or time
Stamping a Place Name into an Image (Stamp Place)
Adjusting the Camera Clock Setting Automatically
(Time Auto Correct)
To Next Page
Loading...
