148
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During movie recording and playback
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode or [
p] (PLAY) in the PLAY mode.
• While the “Power On/Off” setting is selected, pressing [ý] (MAP) will turn on
power only. It will not turn off power.
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Configuring Auto Power Settings (Auto Power Off)
Configuring [r], [p], and [ý] Settings (REC/PLAY)
Power On
Camera turns on whenever [
r] (REC), [p] (PLAY), or [ý]
(MAP) is pressed.
Power On/Off
Camera turns on or off whenever [
r] (REC) or [p] (PLAY)
is pressed.
Disable
Camera does not turn on or off whenever [
r] (REC), [p]
(PLAY), or [ý] (MAP) is pressed.
To Next Page
Loading...
