24
Quick Start Basics
• Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot extend creates the risk of malfunction.
•Pressing [p] (PLAY) while in the REC mode switches to the PLAY mode. The
lens retracts about 10 seconds after switching modes.
• The Sleep function or Auto Power Off (pages 147, 148) will turn off power
automatically if you do not perform any operation for a preset amount of time.
Press [ON/OFF] (Power).
• You can configure the camera so power does not turn on when you press [r]
(REC), [p] (PLAY), or [ý] (MAP). You also can configure the camera to turn off
when you press [r] (REC) or [p] (PLAY) (page 148).
Turning the Camera On and Off
To turn power on
To turn on
power and enter
the REC mode
Press [ON/OFF] (Power) or [r]
(REC).
• The back lamp will light green
momentarily and the lens will extend
out of the camera (page 26).
To turn on
power and enter
the PLAY mode
Press [p] (PLAY).
• The back lamp will light green
momentarily and an image currently
stored in camera memory will
appear on the monitor screen
(page 30).
To turn on
power and enter
the MAP mode
Press [ý] (MAP).
• The back lamp will light green
momentarily, and then the map and
images will appear on the monitor
screen (page 99).
To turn off the camera
[ON/OFF] (Power)
Back lamp
[p] (PLAY) [r] (REC)
[ý] (MAP)
To Next Page
Loading...
Need help?
General
