GETTING READY
29
2.
While pulling the stopper in the direction
indicated by the arrow in the illustration, align
the (–) mark on the battery with the (–) mark
on the camera and slide the battery into the
camera.
(–) marks
NP-40
Stopper
• Push the bottom of the battery, and make sure that
the stopper securely locks the battery in place.
(–) mark
Power Requirements
Your camera is powered by a rechargeable lithium ion
battery (NP-40).
Loading and Removing the
Rechargeable Battery
■ To load the battery
1.
Slide the battery cover in the direction
indicated by the arrow, and then swing it
open.
To Next Page
Loading...
